Categories
- Round bars
- Stainless steel round bars 1.4028 / 3H13
- Stainless steel round bars 1.4122
- Stainless steel round bars 1.4034 / 420C
- Stainless steel round bars 1.4057 / 431
- Stainless steel round bars 1.4301 / 304
- Stainless steel round bars 1.4305 / 303
- Stainless steel round bars 1.4404 / 316L
- Stainless steel round bars duplex steel 1.4462 / S31803
- Stainless steel round bars 1.4541 / 321
- Stainless steel round bars 1.4571 / 316Ti
- Stainless steel round bars from heat-resistant steel
- Stainless steel round bars 1.4005 / 416
- Stainless steel round bars 1.4006 / 410
- Stainless steel round bars 1.4021 / 420A
- Seamless tubes and hollow bars
- Fittings
- Sheets
Item length
Diameter
Steel grade
Availability
Stainless steel peeled round bar Diameter 105 mm in grade 1.4006 / 410 250cm
- Length: 250 cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006 / 410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 100cm
- Length: 100cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 10cm
- Length: 10cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 110cm
- Length: 110cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 120cm
- Length: 120cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 130cm
- Length: 130cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 140cm
- Length: 140cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 150cm
- Length: 150cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 160cm
- Length: 160cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 170cm
- Length: 170cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 180cm
- Length: 180cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel peeled round bar Ø 105 mm in grade 1.4006 / 410 190cm
- Length: 190cm
- Outside diameter (OD): 105 mm
- Steel grade: 1.4006/410
Availability:
sold out
Stainless steel round bars 1.4006 / 410
What is stainless steel round bars 1.4006 / 410?
Stainless steel 1.4006 / AISI 410 is a martensitic stainless steel (often given in standards as EN X12Cr13 or AISI 410). It typically contains around 11.5–13.0% chromium with a low-to-moderate carbon content. In plain terms: these round bars are magnetic, can be heat treated to high strength and hardness, and offer moderate corrosion resistance in neutral or mildly corrosive environments.
Key material characteristics
- Type: martensitic stainless steel (AISI 410 / EN X12Cr13 / 1.4006)
- Corrosion resistance: moderate — suitable for atmospheres free of aggressive chlorides; less resistant than austenitic grades (e.g. 304/316)
- Mechanical properties: good strength and hardness after quench and temper
- Machinability: good in the annealed condition
- Weldability: limited — welding is possible but often requires careful procedure and may need post-weld heat treatment to restore properties
- Magnetic: yes
Typical uses and industries
Stainless steel round bars 1.4006 / 410 are chosen where mechanical strength, hardness and cost-effectiveness are important and where corrosion exposure is not severe. Common applications include:
- Machine construction: shafts, spindles, bushes, pins and wear parts
- Valves and pump components operating in non-chloride environments
- Hydraulic and pneumatic components (where hardness and wear resistance matter)
- Automotive: certain engine and transmission parts that require heat treatment
- Small-scale and garage solutions: tool parts, fasteners, axles and custom mechanical parts
- Industrial applications where parts are exposed to humid but non-aggressive media
Note: for marine, offshore or strongly chloride-containing environments, more corrosion-resistant grades such as 316 (austenitic) are normally recommended.
How you can work with 1.4006 / 410 round bars
- Heat treatment: can be hardened and tempered to increase hardness and strength — useful for wear parts and cutting edges.
- Machining: easier in annealed condition; expect better chip control and tooling life than in many high-alloy grades.
- Forming: limited when hardened; forming is easier in annealed condition.
- Welding: limited weldability — preheating and post-weld heat treatment are often recommended to avoid cracking and to restore mechanical properties.
Designation and equivalents
The product is commonly referenced as 1.4006 (EN), AISI 410 (US), and sometimes listed under designations such as X12Cr13. It is often described in plain language as martensitic stainless steel or simply stainless steel 410.
Why choose stainless steel round bars 1.4006 / 410?
If you need a stainless round bar that can be heat treated for strength and hardness, offers reasonable corrosion resistance for non-aggressive environments, and is generally more economical than high-alloy austenitic grades, 1.4006 / 410 is a practical choice. It is widely used across manufacturing, maintenance and repair, and machine-building sectors.
Need help selecting the right grade or specification?
If you are unsure whether 1.4006 / AISI 410 is the right material for your application (for example, regarding corrosion exposure, heat treatment or welding), contact our technical team. We can advise on suitability, alternative grades (such as austenitic 304/316 for higher corrosion resistance) and supply options for round bars in the sizes you need.