Categories
- Round bars
- Stainless steel round bars 1.4028 / 3H13
- Stainless steel round bars 1.4122
- Stainless steel round bars 1.4034 / 420C
- Stainless steel round bars 1.4057 / 431
- Stainless steel round bars 1.4301 / 304
- Stainless steel round bars 1.4305 / 303
- Stainless steel round bars 1.4404 / 316L
- Stainless steel round bars duplex steel 1.4462 / S31803
- Stainless steel round bars 1.4541 / 321
- Stainless steel round bars 1.4571 / 316Ti
- Stainless steel round bars from heat-resistant steel
- Stainless steel round bars 1.4005 / 416
- Stainless steel round bars 1.4006 / 410
- Stainless steel round bars 1.4021 / 420A
- Seamless tubes and hollow bars
- Fittings
- Sheets
Item length
Diameter
Steel grade
Availability
Stainless steel cold-drawn round bar Ø 14 mm in grade 1.4571 / 316Ti 100cm
- Length: 100cm
- Outside diameter (OD): 14 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 18 mm in grade 1.4571 / 316Ti 100cm
- Length: 100cm
- Outside diameter (OD): 18 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 20 mm in grade 1.4571 / 316Ti 100cm
- Length: 100cm
- Outside diameter (OD): 20 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 8 mm in grade 1.4571 / 316Ti 100cm
- Length: 100cm
- Outside diameter (OD): 8 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Diameter 5 mm in grade 1.4571 / 316Ti 250cm
- Length: 250 cm
- Outside diameter (OD): 5 mm
- Steel grade: 1.4571 / 316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Diameter 8 mm in grade 1.4571 / 316Ti 250cm
- Length: 250 cm
- Outside diameter (OD): 8 mm
- Steel grade: 1.4571 / 316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 10 mm in grade 1.4571 / 316Ti 100cm
- Length: 100cm
- Outside diameter (OD): 10 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 10 mm in grade 1.4571 / 316Ti 10cm
- Length: 10cm
- Outside diameter (OD): 10 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 10 mm in grade 1.4571 / 316Ti 20cm
- Length: 20cm
- Outside diameter (OD): 10 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 14 mm in grade 1.4571 / 316Ti 10cm
- Length: 10cm
- Outside diameter (OD): 14 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 14 mm in grade 1.4571 / 316Ti 110cm
- Length: 110cm
- Outside diameter (OD): 14 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel cold-drawn round bar Ø 14 mm in grade 1.4571 / 316Ti 120cm
- Length: 120cm
- Outside diameter (OD): 14 mm
- Steel grade: 1.4571/316Ti
Availability:
available
Dispatched within: 3 days
Stainless steel round bars 1.4571 / 316Ti
What is 1.4571 / 316Ti stainless steel?
Stainless steel round bars 1.4571 / 316Ti are solid, cylindrical rods made from a titanium‑stabilised austenitic stainless steel. This grade is commonly referenced as 1.4571 (EN) or 316Ti (AISI). In older or national notations you may also see designations such as DIN X6CrNiMoTi17-12-2 or Polish symbols like H17N13M2T. The material is classified as acid‑resistant and offers improved resistance to corrosion and good stability at elevated temperatures thanks to the combined addition of molybdenum and titanium.
Key properties
- Corrosion resistance: Better resistance to pitting and crevice corrosion than general-purpose austenitic grades because of molybdenum content. Well suited to many acidic and chloride‑containing environments.
- High‑temperature stability: Titanium acts as a stabiliser by binding carbon, which reduces the risk of chromium carbide precipitation (sensitisation) during welding or high‑temperature service.
- Weldability and formability: The grade is readily weldable and formable. Preheating is not normally required and post‑weld heat treatment is usually unnecessary for most applications.
- Mechanical behaviour: Typical austenitic toughness and ductility—suitable for machining, turning and grinding into components.
Common applications and industries
Stainless steel round bars 1.4571 / 316Ti are used where a combination of corrosion resistance and stability at elevated temperatures is needed. Typical uses include:
- Medical and dental equipment (e.g. surgical instruments, implants and bone connectors), where corrosion resistance and biocompatibility are important.
- Chemical, pharmaceutical and paint industry components that are exposed to acids or aggressive chemicals.
- Food and beverage processing equipment where cleaning and sterilisation cycles occur at raised temperatures.
- Energy and petrochemical applications, including plant components that require improved high‑temperature performance.
- General engineering, maintenance, fabrication and DIY/garage projects—for bushings, shafts, pins, and turned parts made from stainless round bar.
- Light marine and offshore uses in moderately corrosive environments (note: for very severe chloride exposure, duplex or higher‑alloy grades may be preferred).
Who buys these round bars?
- Engineers and design teams specifying corrosion‑resistant components.
- Fabricators, machinists and metalworking workshops producing shafts, studs and precision turned parts.
- Manufacturers of medical, pharmaceutical and food‑processing equipment.
- Maintenance and procurement teams replacing parts subject to chemical attack or high temperatures.
- Hobbyists and specialist builders requiring stainless round bar material for corrosion‑resistant projects.
Grades and equivalents
This category name uses several common notations so buyers can easily identify the material:
- EN / European: 1.4571
- AISI / common international: 316Ti
- DIN: X6CrNiMoTi17‑12‑2
- Polish/older: H17N13M2T (and related notations)
Processing and welding notes
1.4571 / 316Ti is generally easy to machine and weld. Because titanium stabilises the steel, the risk of sensitisation during welding is reduced, so in many cases no preheating or post‑weld heat treatment is required. That said, for critical or pressure‑containing components, thick sections or applications with specific certification requirements, follow the welding consumable and procedure recommendations from your metallurgist or standards documentation.
Buying guidance
When selecting stainless steel round bars 1.4571 / 316Ti, consider:
- Diameter and length required for machining and final part tolerances.
- Surface finish (bright/turned, cold‑drawn, mill finish) depending on appearance and machining needs.
- Certification — request material certificates (e.g. EN 10204) if you need traceability for medical, food or pressure equipment use.
If you need help choosing the right bar size, surface finish or certification for a particular application, contact our technical sales team for advice tailored to UK standards and industry practice.